VDE 0276 NYCWY 4X120/70MM2 0.6/1KV PVC POWER CABLE WITH COPPER CONCENTRIC Conductor
Product Description
VDE 0276 NYCWY 4X120/70MM2 0.6/1KV PVC Power Cable WITH COPPER CONCENTRIC Conductor
Double insulated cathodic protection cables
XLPE/PVC of cathode cable
Simple, Cu conducting, double insulated cables particularly developed for cathodic protection applications, meeting optimally the demands of CP cables and various environmental conditions.
Parts, function
- Cu conductor, electrical conducting function
- PVC coated insulation, that
- provides the chloride- and hydrogen-proof properties around anodes
- withstands local alkalining arising in the environment of protected metal structures
- provides cable functions indicated by different colours: black, red, blue
- optionally can be fitted with armour (XLPE/PVC/SWA/PVC) in case of intensive mechanical stress. This type of cable is available with a layer of steel wire armouring and further PVC sheath to provide added mechanical protection either where the cable is directly buried or not run inside conduit.
KYNAR/HMWPE
Single/multi core stranded tinned copper conductor with radiation cross linked primary insulation of modified Kynar/polyvinylidene flouride and an outer jacket of modified polyolefin. This cable is resistant to salt water and most organic and inorganic substances.
| Application | These cables are designed for use in cathodic protection deep well installations or other situations where resistance to chlorine gas is required.The primary ECTFE (Halar) insulation provides chemical resistance properties. The secondary or outter jacket of high molecular weight polyetdylene (HMWPE) provides abrasion resistance. |
| Standard | ICEA S-61-402/NEMA WC5 |
| Conductor | Stranded bare copper conductor conforms to ASTM Specification B-3 and B-8. |
| Insulation | A homogeneous wall of natural ECTFE fluoropolymer (Halar) shall be extruded over tde conductor. |
| Jacket | Insulation is high molecular weight polyetdylene conforming to ASTM-D-1248, Type 1, Class C, Category 5, Grades J1 and E5. Tensile Strengtds Jl, J3. Available witd high density polyetdylene (Types II, III, IV) Class B and C (all colors). |
| Technical Data | Rated Voltage: 600V Operating Temperature: 75℃ |
Dimensions of cathode cable
CONDUCTOR SIZE | NO. OF STRANDING | CIRCULAR MILS | AWG DIAMETER | HALAR THICKNESS | HMWPE THICKNESS | NOMINAL OUTER DIAMETER | TOTAL WEIGHT |
|
|
| IN | IN | IN | IN | LBS/MFT |
8 AWG | 7 | 16.51 | 0.146 | 0.02 | 0.065 | 0.316 | 83 |
6 AWG | 7 | 26.24 | 0.184 | 0.02 | 0.065 | 0.354 | 120 |
4 AWG | 7 | 41.74 | 0.232 | 0.02 | 0.065 | 0.402 | 177 |
2 AWG | 7 | 66.36 | 0.283 | 0.02 | 0.065 | 0.462 | 260 |
Specification of other products
| Reference Standards: | IEC60502-1, IEC 60228, IEC60332 -1/2/3, BS6346, BS5467, BS6360, BS6724, VDE0276, AS/NZS 5000.1, etc. |
| Rated Voltage: | 600/1000V (0.6/1kV) |
| Core Number: | Single Core, Two Core, Three Core, Four Core, Five Core (1C, 2C, 3C, 4C, 5C) |
| Available Dimensions: | 1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2. |
| Codes Available: | NYY, NAYY, N2XY, NA2XY, NYCY, NYCWY, NYBY, NAYBY, NYRY, NAYRY, N2XRY, N2XBY, NA2XBY, NA2XRY, N2XH, NA2XH,NHMH, NHXMH, |
| VV, VLV,YJV, YJLV, VV22, VLV22, YJV22, YJLV22, VV32, VLV32, YJV32, YJLV32, VV72, VLV72, YJV72,YJLV72 | |
| Application: | To be laid indoors, in tunnel, cable furrow or pipe, underground. Steel tape armored cable could bear certain mechanical force, but it can't bear great pulling force. Steel wire armored cable is applicable to the well, water inside and fall in the bad soil, it can bear great pulling strength and mechanical forces. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected during installation. |
| Construction: | |
| Conductor: | Stranded round compacted copper or aluminum conductor (Cu / Al ), Copper Wire annealed. |
| Insulation: | XLPE (Cross-Linked Polyethylene) or PVC (Polyvinyl Chloride) |
| Core Identification: | 1 Core: Brown 2 Cores: Brown, Blue 3 Cores: Brown, Black, Grey 4 Cores: Blue, Brown, Black, Grey 5 Cores: Green/Yellow, Blue, Brown, Black, Grey Alternative core identification: White Cores with Black numbers |
| Filler: | Polypropylene filament with lapped binding tape |
| Separator: | Binding tape |
| Bedding: | PVC (Polyvinyl Chloride) or LSZH. |
| Armouring: | Single Core: Aluminium Wire Armoured (AWA) Multi-core: Steel Wire Armoured (SWA) or Steel Tape Armoured (STA) |
| Sheath: | PVC (Polyvinyl Chloride), flame retardant PVC, PE, LSOH, HFFR |
| Colour: | Black |
| Temperature Rating: | 0°C to 90°C (XLPE), 0°C to 70°C (PVC) During short circuit (lasting less than 5 seconds) the maximum temperature of the cable conductor shall not be above 250°C (160°C for PVC) Environment temperature should be no lower than 0°C for laying the cable. |
| Minimum Bending Radius: | Single Core Cable: Non Armored Cable 20D, Armored Cable 15D Cores Cable: Non Armored Cable 15D, Armored Cable 12D. Remarks: D means practical external diameter of the cable |
Application:
The PVC Insulated power cable and fire resistant cable are suitable for fixed laying in power transmission
and distribution lines with A.C.50Hz and voltage rating of up to or including 6KV.
Performance Characteristics:
1. The long-term permissible operation temperature of conductor shall not be higher than 70 .
2. Conductor maximum short circuit (not more than 5 seconds) temperature shall not be higher than 160 .
3. The cable is not limited by drop in level when being laid, and the environment temperature shall not be 0 .
4. Perfect chemical stability, resistant against acids, alkalis, grease and organic solvents, and flame retardance.
5. Light weight, perfect bending properties, installed and maintained easily and conveniently.
Voltage rating: 0.6/1KV 3.6/6KV.
Conductors: copper or aluminum.
Number of cable cross: one core (Single core), two cores (Double cores), three cores, four cores (Four Equal-section-area cores or three equal-section-area and one smaller section area neutral core), five cores (Five equal section-area cores or three equal-section-area cores and two small area neutral cores). We provide armored type and non-armored type for the cables stated above.
Outer sheath: PVC or PE.
Our company has been carrying out Chinese national standard GB12706 and GB12666.6 (equivalent to IEC60502 and IEC60331) for PVC insulated power cable and fire resistant cable needed by domestic customer, and for foreigner customers we can manufacture in accordance with BS, DIN and other countries standards. In addition, we can design and manufacture PVC insulated power cable with special characteristics according to needs of customers.
Packing:
Steel wooden drum (fumigation)
Cable length in each drum: 500m/1000m or as per actual cable length requirements.
Drum size:
As per cable length and container size
*In order to quote you accurate price, kindly tell us your needed cable length quantity. Larger quantity, more discount benefit ready for you!
Shipping:
Port: Tianjin, Qingdao, or other ports as per your requireents.
Sea freight:
FOB/C&F/CIF quotation are all available.
*For some countries such as Africa countries, middle east countries, our sea freight quotation is much cheaper than clients get from local shipping agency.
Our service
we are one of the biggest manufacture in china mainland. We will give you a perfect shopping experience . If you need visit our factory , we will meet you at the airport or train station.
Also we can offer other service
Custom Merchandise:we can make cable as your need include the color ,size and so on.we also offer OEM .
Complete Course Tracking:we can offer you the service from the business begin to you get the cable and use it .
Company information
Cable sample: we can offer the sample free .
Zhengzhou hongda cable Co., Ltd.
Established Year:1999
Registered capital of RMB:5,000,000
Factory Area:300,000m2
Main products:
Areial bundle cable ,XLPE insulated power cable ,PVC insulated power cable ,electrical wire ,bare aluminum conductor(AAC AAAC ACSR )and so on
Main export county:
USA Philippines Malaysia Indonesia Venezuela, Colombia Mexico
Dominica India South Africa Zambia Kenya and so on .
1. We have a large production base, and advanced production equipment
2. Have an competitive price and high quality
3. Excellent after-sale service
4. Attractive design and various styles
5. Free issue:packaging list,invoice,CD installation
6. Powerful technology R&D team
7. Strict quality assurance system and perfect testing means
8. Advanced process equipment
9. Painted with powerful antiseptic Anticorrosion material paints
10. Delivery on time
11. Our roller coaster sales to Middle East,Africa,Russia,Southeast Asia, etc.
12.We have a good reputation in the overseas
Q 1: I didn’t find the cable I need in this page?
A: Dear Friend, we supply customized service. So, you can contact me directly for the as follows information, I will reply you asap!
Q 2: What’s your Minimum Order Quantity?
A: You are advised to please confirm with us as it is based on the specification of the cables. Normally, it is 100m for small electric wires. 500 to 1000 per drum for power cable.
Q 3: What’s your delivery time?
A: It depends on whether we just has the stock for your type. Or, it takes about 7 - 15 days for normal orders.
Q 4: How can I get a sample to check your quality?
A: After price confirmation, you can require for sample to check our quality. Sample is free, but the freight charge should be paid.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment.
Contact information
Any needs or question ,please contact us ,we will be more pleasure to service you.
We are looking forward to your inquiry and nice cooperaton.
Product Categories : Concentric Cable
Premium Related Products
